MC100EP016AMNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP016 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Bits | 8 |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 1 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive, Negative |
| Number of Input Lines | 8 |
| Count Rate | 1.4GHz |
| Timing | Synchronous |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP016AMNR4G Overview
32-VFQFN Exposed Padis a package in which this device is packaged. There are 32terminations used for configuring it. Having a supply voltage of 3.3V enables to operate in a fully flexible manner. 1 elements are interconnected in wires. In all, there are 32 pins on each component. It is packaged in a manner consistent with Tape & Reel (TR). Circuit components are connected by 32pins. The device is mounted in the direction of [0]. Due to its membership in the 100EPseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. A temperature of -40°C~70°Cshould be set for the operating environment. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. This device contains information in 8bits. The result may be yeswhen expressing the result in Pbfree code. It is important to note that NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6Vare really important features of this electronic device. You can find more related parts under its base part number of 100EP016. It is packed by [0]. Voltage from the voltage source is [0]. For the device to operate, a voltage supply of 3.3Vis required. The minimum supply voltage (Vsup) is 3V. A maximum supply voltage (Vsup) is available up to 3.6V. The 8input lines are used to input binary data as on/off signals.
MC100EP016AMNR4G Features
Embedded in the 32-VFQFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V
Operating supply voltage of 3.3V
MC100EP016AMNR4G Applications
There are a lot of ON Semiconductor MC100EP016AMNR4G Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Communications Digital Frequency Synthesizers;
- Analog multiplexing and demultiplexing
- Programmable decade counters
- Divide-by-N counting
- Dual Up Counters
- Time delay circuits
- Control counters
- Divide-by"N" counters/frequency synthesizers