MC100EP016AFAG
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Weight | 773.99868mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tray |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V |
| Technology | ECL |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 1.4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP016 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 4 |
| Number of Bits | 8 |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 1 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Max Input Voltage | 2.42V |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive, Negative |
| Number of Output Lines | 8 |
| Timing | Synchronous |
| Height | 1.4478mm |
| Length | 6.985mm |
| Width | 7.0104mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP016AFAG Overview
This device is packaged in a 32-LQFP package. It is configured with 32terminations. The supply voltage of 3.3V permits it to operate with full flexibility. There are wires connecting 1elements. There are a total of 32 pins in all components. It is packaged in the way of Tray. Circuit components are connected by 32pins. The way of Surface Mount is used to mount it. Due to the fact that it is a member of the 100EPseries, it has a wide range of applications. The logic type of Binary Counter is adopted. -40°C~70°Cis the recommended operating temperature. This device is mounted in a Surface Mountmanner. When a supply voltage of 3V~3.6Vis provided, it can operate with greater reliability. There are 8bits of information contained in the device. In terms of Pbfree code, the result may be yes. In regard to this electronic device, NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6Vare essential features. Among its base part number [0], you will find additional parts that are related. For the device to operate, a voltage supply of 3.3Vis required. Supply voltages can be as low as 3V volts (Vsup). With a frequency of [0], it operates. Up to a maximum voltage of 3.6Vcan be supplied (Vsup). There are 8output lines on the device. As a standard feature, it has a 4circuit design.
MC100EP016AFAG Features
Embedded in the 32-LQFP package
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V
Operating supply voltage of 3.3V
Frequency of 1.4GHz
MC100EP016AFAG Applications
There are a lot of ON Semiconductor MC100EP016AFAG Counters & Dividers applications.
- Frequency division
- Fixed and programmable counters greater than 10
- Binary counter/decoder
- SQUARE ROOT
- Frequency dividing circuits
- Fixed or Programmable Frequency Division
- Frequency dividers
- ANALOG SIGNAL PROCESSING
- TRUE RMS-TO-DC CONVERSION
- Up Counters