MC100ELT28DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100ELT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100ELT28 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Single-Ended |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Logic Function | Translator |
| Output Polarity | COMPLEMENTARY |
| Channel Type | Unidirectional |
| Output Signal | TTL, PECL |
| Translator Type | Mixed Signal |
| Input Signal | PECL, TTL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100ELT28DT Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is available for you to use.Level translators is packaged in the way of Tube.Level translators is configured wlevel translatorsh an output of Differential, Single-Ended.This electrical device has a translator type of Mixed Signal.Level translators is mounted according to the Surface Mount method.Unidirectional is the Channel type of this electrical device.During operation, the temperature is set to -40°C~85°C TA.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.Transmission lines can be terminated using 8 terminations to end them.A series of related parts can be determined from the base part number 100ELT28.Level translators is powered by a 5V supply.Level translators has 8 pins.This is a device from the 100ELT series.Electronic parts are designed with a number of bits of 1.Supports a voltage of 5.25V as its maximum supply voltage.The minimal voltage for operation is 4.75V.There are no channels.Powered by a 5V battery, it can run for an extended period of time.
MC100ELT28DT Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
100ELT series
5V power supplies
MC100ELT28DT Applications
There are a lot of ON Semiconductor MC100ELT28DT voltage translators & level shifters applications.
- One Fabrication Site
- Controlled Baseline
- MDIO
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- GPIO
- ADAS Fusion
- Wireless and Telecom Infrastructures
- SMBus
- Motor Drives
- Routers (routing equipment)