MC100ELT23DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100ELT23 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | PECL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100ELT23DTR2G Overview
Level translators is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Packaged as Tape & Reel (TR).Level translators uses Non-Inverted as level translatorss output configuration.There is a translator type of Mixed Signal for this electrical device.The electronic part is mounted using the Surface Mount method.This electrical device has channel type Unidirectional.The temperature used for operation is -40°C~85°C TA.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.To end a transmission line, there are 8 types of termination that can be used.Level translators is possible to determine Level translatorss related parts using the base part number 100ELT23.This device is powered by a supply voltage of 5V which is applied to it.A total of 8 pins are included.There are a number of devices in the series 100ELT that belong to it.The board has 8 pins.The design of this electronic part is based on 1 bits.Supports a voltage of 5.25V as its maximum supply voltage.With a minimum supply voltage of 4.75V, it operates.Using the method of Surface Mount, this electronic component is mounted.There are no channels.5V power supplies are required to run it.If the supply voltage is kept at 5V, a high level of efficiency can be achieved.
MC100ELT23DTR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
100ELT series
8 pins
5V power supplies
MC100ELT23DTR2G Applications
There are a lot of ON Semiconductor MC100ELT23DTR2G voltage translators & level shifters applications.
- LCD Panels Using GIP / GOA / ASG Technology
- Driving indicator LEDs or buzzers
- Power-sensitive applications
- Data and Clock Transmission Over Backplane
- Driving Indicator LEDs or Buzzers
- Test Site
- Desktop PC
- SDIO
- General purpose I/O level shifting
- Telecommunications