MC100EL51DTR2G
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL51 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 565 ps |
| Turn On Delay Time | 475 ps |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 29mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.62 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 36mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
MC100EL51DTR2G Overview
As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive, Negative. There is an electrical part that is mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. The 100ELseries comprises this type of FPGA. It should not exceed 2.8GHzin its output frequency. This process consumes 29mA quiescents. There have been 8 terminations. You can search similar parts based on 100EL51. A voltage of 5V is used as the power supply for this D latch. There is an electronic component mounted in the way of Surface Mount. The 8pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. The flip flop is designed with 1bits. As soon as Vsup reaches 5.7V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 4.2V. In order to achieve its superior flexibility, 1 circuits are used. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires -4.5V power supplies. NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis also one of its characteristics.
MC100EL51DTR2G Features
Tape & Reel (TR) package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL51DTR2G Applications
There are a lot of ON Semiconductor MC100EL51DTR2G Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Latch
- Count Modes
- Computers
- Frequency Dividers
- Power down protection
- High Performance Logic for test systems
- Event Detectors
- Buffer registers
- ESCC