MC100EL33DTR2
| Parameters | |
|---|---|
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL33 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 37mA |
| fmax-Min | 3800 MHz |
| Count Rate | 4.2GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
MC100EL33DTR2 Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. There are 8terminations used for configuring it. Having a supply voltage of 5V enables to operate in a fully flexible manner. A wire connects the 1elements. The total number of component pins is 8. Packaging is based on Tape & Reel (TR). The device is mounted in the direction of [0]. Having been designed as a member of the 100ELseries, it is well suited for use in a wide range of applications. Divide-by-4is adopted as the logic type. In this case, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. By providing the supply voltage of [0], it is capable of operating more reliably. When it comes to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V are much important features. Its base part number, [0], contains more related parts. As a result of the voltage source, there is -4.5V voltage. As low as 4.2V Vsup is the minimum supply voltage. There is 5.7V maximum supply voltage (Vsup) allowed. This electronic part belongs to the Prescaler/Multivibrators family. This device is configured with 1 data/clock inputs.
MC100EL33DTR2 Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL33DTR2 Applications
There are a lot of ON Semiconductor MC100EL33DTR2 Counters & Dividers applications.
- MULTIPLICATION
- Time delay circuits
- VHF, UHF, FM, AM, etc.
- Binary counter/decoder
- Time-delay circuits
- SQUARE ROOT
- Decade counter/decimal decode display (CD4017B）
- Frequency dividing circuits
- Signal gating
- Timing applications