MC100EL32MNR4G
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL32 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Nominal Supply Current | 25mA |
| Propagation Delay | 690 ps |
| Reset | Asynchronous |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 35mA |
| fmax-Min | 2600 MHz |
| Max Frequency@Nom-Sup | 2600000000Hz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
MC100EL32MNR4G Overview
This device is packaged in a 8-VFDFN Exposed Pad package. In order to configure it, it uses 8terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. 1 elements are interconnected in wires. A total of 8pins are present on all components. Tape & Reel (TR)is the packaging method used for this package. In the circuit, there are 8pins that connect other parts. It is mounted using the way of [0]. This device is a member of the 100ELseries and is well suited for a wide range of applications. Logic type Divide-by-2 is adopted. Setting the operating temperature to -40°C~85°C is recommended. A mounting type of Surface Mountis adopted. Providing a supply voltage of 4.2V~5.7Vallows it to operate more reliably. In terms of Pbfree code, the result may be yes. It is important to note that in regards to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis an extremely significant feature. There are more related parts under the 100EL32base part number. Voltage from the voltage source is [0]. As low as 4.2V Vsup is the minimum supply voltage. Up to a maximum voltage of 5.7Vcan be supplied (Vsup). The electronic part belongs to the Prescaler/Multivibrators family. The data/clock inputs have been configured to [0].
MC100EL32MNR4G Features
Embedded in the 8-VFDFN Exposed Pad package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL32MNR4G Applications
There are a lot of ON Semiconductor MC100EL32MNR4G Counters & Dividers applications.
- Timers
- POWER COMPUTATION
- Divide-by"N" counters/frequency synthesizers
- MULTIPLICATION
- counting/frequency sy nthesizers-BCD output
- Counter control/timers
- Digital multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
- Programmable binary and decade
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters