MAX9917EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9917 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 40μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Voltage Gain-Min | 17780 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9917EUB+T Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 10 terminations over the past year. It consists of a total of 10 pins in total. This linear amplifier should be powered by an 1.8V battery. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In total, there are 2 circuits on this buffer amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As a result of this, the buffer amplifier is packed in TAPE AND REEL. There is a recommendation that this electrical part be used with a supply with 40μA current rating. This operational amplifier can conduct a voltage gain of up to 17780 at a minimum.
MAX9917EUB+T Features
10 Pins
supply voltage of 1.8V
Output Type: Rail-to-Rail
MAX9917EUB+T Applications
There are a lot of Maxim Integrated MAX9917EUB+T Instrumentational OP Amps applications.
- Ultrasound transducers
- Comparator
- Video data acquisition
- Television
- Power transmission
- Voltage regulation circuit
- Exponential operation circuits
- Differentiator circuits
- Signal amplification
- High speed sample