MAX976EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX976 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 225μA |
| Propagation Delay | 28 ns |
| Quiescent Current | 650μA |
| Supply Current-Max | 0.65mA |
| Turn On Delay Time | 20 ns |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 75nA |
| Current - Quiescent (Max) | 650μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.075μA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 95dB CMRR, 100dB PSRR |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX976EUA+ Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type CMOS, Rail-to-Rail, TTL output.As a result, it is designed with Tube package.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparators families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .A total of 2 elements can be found in it.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX976 .The comparator presents a quiescent current of 650μA volts.The PCB or other board can be mounted using the Surface Mount on it.The device can be run with 3/5V power supplies.This part can be supplied with a maimum current of 0.65mA .
MAX976EUA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 650μA
MAX976EUA+ Applications
There are a lot of Maxim Integrated MAX976EUA+ linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Appliances
- Ultra-Low Power Systems
- General Purpose Low Voltage Applications
- Limit Comparators
- Point of load regulators
- Security Detection Systems
- Power management
- Analog front end
- Power Supervision