MAX9718FEBL+TG45
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, CSPBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | NOT SPECIFIED |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.633W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9718 |
| Pin Count | 9 |
| JESD-30 Code | S-PBGA-B9 |
| Qualification Status | Not Qualified |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 7.5mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | -60 dB |
| Bandwidth | 22 kHz |
| Max Output Power | 1.4W |
| Max Output Power x Channels @ Load | 1.4W x 1 @ 4 Ω |
| Height Seated (Max) | 0.67mm |
| Length | 1.52mm |
| Width | 1.52mm |
| RoHS Status | ROHS3 Compliant |
MAX9718FEBL+TG45 Overview
I have embedded this device in 9-WFBGA, CSPBGA .Amp parts is packaged in the way of Tape & Reel (TR) .Transmission lines can be terminated with 9 terminations, which have devices that match the line's characteristic impedance.Amp parts uses 1-Channel (Mono) as the output.The type of this electrical device is Class AB .As part of the signal interface in a computer or other communication device, there are 16 pins.Amp parts is mounted in front of Surface Mount .There is 2.7V~5.5V voltage supply to this electrical device.Channels 1 are present in the device.Ensure that Depop, Differential Inputs, Shutdown, Thermal Protection is maintained when operating.Ideally, the operating temperature should not exceed -40°C~85°C TA .In addition, it is equipped with 9 pins.Audio/Video Amplifiers contains it.The MAX9718 family includes it.In this case, the electronic part is mounted in the way of Surface Mount .In this electronic part, the output power is a maximum of 1.4W kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.7V .The maximal supply voltage (Vsup) reaches 5.5V .Amp parts is powered by a 3/5V volt power supply.
MAX9718FEBL+TG45 Features
9-WFBGA, CSPBGA package
9 pin count
MAX9718 family
1.4W kWh per hour
MAX9718FEBL+TG45 Applications
There are a lot of Maxim Integrated MAX9718FEBL+TG45 audio amplifiers applications.
- Precision measurement
- Power generator
- Active probe
- Scintillation detectors
- Proportional operation circuits
- Medical imaging
- Switching amplifier
- Power transmission
- Comparator
- Band-stop filter