MAX970ESD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX970 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 1.5/5.5V |
| Supply Current-Max | 0.018mA |
| Response Time | 20000 ns |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 20μs |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX970ESD Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type Open-Drain, Rail-to-Rail output.This device is designed in Tube case.You can find 14 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .A comparator of this type is typically of type General Purpose .There are a total of 4 elements in it.The device includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Try search MAX970 to get more pin-to-pin solutions for your special needs.This device requires 1.5/5.5V power supplies to operate.The part can be powered at a minimum current of 0.018mA .
MAX970ESD Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
MAX970ESD Applications
There are a lot of Maxim Integrated MAX970ESD linear comparators applications.
- Point of load regulators
- Set Top Boxes
- Mobile Phones and Tablets
- Threshold Detectors
- Limit Comparators
- Portable Battery Monitoring
- Metering Systems
- Battery management and protection
- Appliances
- General-Purpose, Low-Voltage Applications