MAX9709ETN+D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 3.81W |
| Technology | BICMOS |
| Voltage - Supply | 10V~22V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9709 |
| Pin Count | 56 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Number of Channels | 2 |
| Nominal Supply Current | 20mA |
| Quiescent Current | 20mA |
| Output Power | 50W |
| Common Mode Rejection Ratio | 70 dB |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Output Power | 50W |
| Max Output Power x Channels @ Load | 50W x 1 @ 4 Ω; 29W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Number of Amplifiers | 1 |
| Load Impedance | 4Ohm |
| Height | 750μm |
| Length | 8.1mm |
| Width | 8.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9709ETN+D Overview
In the 56-WFQFN Exposed Pad package, it is embedded.Ideally, the chip should be packaged in a Tube case.The output it is configured with uses 1-Channel (Mono) or 2-Channel (Stereo) .An electrical device of type Class D is involved.56 pins are pronged contacts on a computer or other communication device that form a signal interface.The electronic component is mounted in the way of Surface Mount .This electrical device is powered by 10V~22V volts.The number of channels is growing strong/weak: 2 .Amp parts is possible to guarantee Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown when operating.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.There are 56 pins present on this device.Audio/Video Amplifiers incorporates this part.The MAX9709 family includes it.A part of this electronic device is mounted in the way of Surface Mount .A maximum output power of 50W kWh per hour can be achieved with this electronic part.Electronic parts with Single supply types are available.As long as external factors do not affect it, it consumes 20mA of quiescent current.The number of amplifiers is 1 and they are electronic devices that increase voltage, current, or power.
MAX9709ETN+D Features
56-WFQFN Exposed Pad package
56 pin count
MAX9709 family
50W kWh per hour
MAX9709ETN+D Applications
There are a lot of Maxim Integrated MAX9709ETN+D audio amplifiers applications.
- Weak signal detection
- Signal filtering
- Portable electronic products powered by batteries
- Logarithmic and exponential operation circuits
- Precision measurement
- Biopotential
- Test and measurement instruments
- Addition and subtraction operation circuits
- Signal transformation
- Vehicle electronics