MAX966ESA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX966 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Supply Current-Max | 0.01mA |
| Response Time | 20000 ns |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 10μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 20μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX966ESA Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is Open-Drain, Rail-to-Rail .Electronic comparator is shipped by Tube .The comparator has 8 terminals.The electrical component here belongs to the Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .A total of 2 elements can be found in it.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.Search MAX966 to find more pin-to-pin solutions.A power supply of 1.5/5.5V is sufficient for the operation of the device.This part can be supplied with a maimum current of 0.01mA .
MAX966ESA Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
MAX966ESA Applications
There are a lot of Maxim Integrated MAX966ESA linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Infotainment & cluster
- Battery management and protection
- Ultra-Low Power Systems
- Lithium ion battery monitoring
- Body Control Modules
- Zero-Crossing Detectors
- Threshold Detectors
- Analog front end
- Point of load regulators