MAX965ESA+
| Parameters | |
|---|---|
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX965 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Max Supply Current | 7μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 12μA |
| Turn On Delay Time | 10 μs |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 50nA |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 12μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
MAX965ESA+ Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .Output type Open-Drain, Rail-to-Rail is used for this comparator.The part is shipped by Tube .The device is designed with 8 terminations.Electronic comparator is a component of the Comparators family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a with Voltage Reference chip.Currently, it consists of only 1 elements.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has 8 pins.Search MAX965 to find more pin-to-pin solutions.This comparator presents a quiescent current of 12μA .There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 7μA .If the current supply exceeds 7μA , the comparator could malfunction.Electronic comparator is possible to input a maximum of 50nA current into the device.
MAX965ESA+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12μA
MAX965ESA+ Applications
There are a lot of Maxim Integrated MAX965ESA+ linear comparators applications.
- Body Control Modules
- Mobile Phones
- Building automation
- Portable Battery Monitoring
- Power management
- Infotainment & cluster
- Ultra-Low Power Systems
- Wearable Devices
- Self-diagnostics
- Window Comparators, Multivibrators