MAX9381ESA+
| Parameters | |
|---|---|
| Propagation Delay | 328 ps |
| Logic Function | D-Type, Flip-Flop |
| Trigger Type | Negative Edge |
| High Level Output Current | -50mA |
| fmax-Min | 3000 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Technology | BIPOLAR |
| Voltage - Supply | -2.25V~-5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX9381 |
| Function | Standard |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 2 |
| Number of Bits | 1 |
| Clock Frequency | 3GHz |
MAX9381ESA+ Overview
The package is in the form of 8-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. There is a Differentialoutput configured with it. The trigger configured with it uses Negative Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of -2.25V~-5.5V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In order for it to function properly, its output frequency should not exceed 3GHz. In total, it contains 1 elements. There have been 8 terminations. The MAX9381 family contains it. An input voltage of 3.3Vpowers the D latch. In this case, the electronic component is mounted in the way of Surface Mount. There are 8pins on it. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 1bits are used in this part. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The superior flexibility of this product is achieved by using 2 circuits. High level output current is set to -50mA.
MAX9381ESA+ Features
Tube package
8 pins
1 Bits
MAX9381ESA+ Applications
There are a lot of Maxim Integrated MAX9381ESA+ Flip Flops applications.
- Shift registers
- Individual Asynchronous Resets
- Modulo – n – counter
- Bounce elimination switch
- Pattern generators
- ATE
- Reduced system switching noise
- Communications
- QML qualified product
- Circuit Design