MAX932ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | MAX932 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.5μA |
| Output Current | 15μA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Dual Supply Voltage | 5V |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX932ESA+ Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, TTL .We ship the part through Tube .There are 8 terminals on the comparator.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type with Voltage Reference .There are a total of 2 elements in it.There are 8 pins on this board.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search MAX932 for more options.A quiescent current of 6μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 4.5μA .An excess of current supply over 4.5μA could result in malfunction of the comparator.
MAX932ESA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
MAX932ESA+ Applications
There are a lot of Maxim Integrated MAX932ESA+ linear comparators applications.
- Current and voltage sensing
- Hand-Held Electronics
- Mobile Phones
- Laptop Computers
- Point of load regulators
- System control and monitoring
- Wide Range VCO; MOS Clock Timers
- Window Comparators, Multivibrators
- Self-diagnostics
- Analog front end