MAX921ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX921 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 3.2μA |
| Output Current | 50mA |
| Max Supply Current | 3.2μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 5μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX921ESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, TTL is being used.Electronic comparator is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator is possible to classify the chip as with Voltage Reference .This is a 1 element comparator.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.You can search MAX921 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 5μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 3.2μA .If the current supply exceeds 3.2μA , the comparator might be damaged.
MAX921ESA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
MAX921ESA+ Applications
There are a lot of Maxim Integrated MAX921ESA+ linear comparators applications.
- Industrial
- Wireless Base Stations
- Body Control Modules
- Handheld Instruments
- Portable Battery Monitoring
- Set Top Boxes
- Multivibrators and High-Voltage Digital Logic Gates
- Hand-Held Electronics
- DC/DC and AC/DC power supplies
- Metering Systems