MAX9141ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 470.6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9141 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 16mA |
| Max Supply Current | 200μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 320μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.32μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Current - Quiescent (Max) | 320μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9141ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a CMOS, Push-Pull, TTL output.Ready for shipping in Tube package.The comparator has 8 terminals.The chip belongs to Comparators .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical with Latch .In total, it contains 1 elements.A total of 8 pins are included.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.Alternatively, you may search for MAX9141 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 320μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 200μA supply current.An excess of current supply over 200μA could result in malfunction of the comparator.The device can be operated with 3/5V power supplies.A maximum current of 320nA can be supplied to the device.
MAX9141ESA+ Features
CMOS, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 320μA
MAX9141ESA+ Applications
There are a lot of Maxim Integrated MAX9141ESA+ linear comparators applications.
- Metering Systems
- Portable Battery Monitoring
- Limit Comparators
- Window Comparators
- Point of load regulators
- Set Top Boxes
- Mobile Phones and Tablets
- Industrial
- Self-diagnostics
- Window Comparators, Multivibrators