MAX9117EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 200mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9117 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1.3μA |
| Output Current | 50mA |
| Max Supply Current | 1.3μA |
| Propagation Delay | 40 μs |
| Quiescent Current | 1.6μA |
| Response Time | 40000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.6μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9117EXK+T Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 to facilitate transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.We ship the part through Tape & Reel (TR) .5 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type with Voltage Reference .In total, it contains 1 elements.Electronic comparator has 5 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 5 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9117 .There is 1.6μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1.3μA when using the device.If the current supply exceeds 1.3μA , the comparator might be damaged.The maximal current your can input into the device is 1nA .The part is based on Beyond-the-Rails? .
MAX9117EXK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX9117EXK+T Applications
There are a lot of Maxim Integrated MAX9117EXK+T linear comparators applications.
- Window Comparators
- Appliances
- Metering Systems
- Hand-Held Electronics
- Threshold Detectors
- Laptop Computers
- Battery management and protection
- Window Comparators
- Zero-Crossing Detectors
- Notebooks and PDAs