MAX9092AUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9092 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Output Current | 35mA |
| Propagation Delay | 110 ns |
| Quiescent Current | 200μA |
| Supply Current-Max | 0.3mA |
| Response Time | 115 ns |
| Common Mode Rejection Ratio | 90 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 200μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| CMRR, PSRR (Typ) | 90dB PSRR |
| Current - Output (Typ) | 35mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX9092AUA+ Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type Open Drain output on this device.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .This element consists of 2 elements in total.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.This comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX9092 .The comparator presents a quiescent current of 200μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 93.98dB .With this part, a minimum current of 0.3mA can be supplied.
MAX9092AUA+ Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
MAX9092AUA+ Applications
There are a lot of Maxim Integrated MAX9092AUA+ linear comparators applications.
- Battery management and protection
- Notebooks and PDAs
- Zero-Crossing Detectors
- Security Detection Systems
- Simple Analog-to-Digital Converters (ADCs)
- Motor drives
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Portable Battery Monitoring
- Current and voltage sensing