MAX9077EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9077 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 6.6μA |
| Max Supply Current | 6.6μA |
| Propagation Delay | 580 ns |
| Quiescent Current | 6.6μA |
| Response Time | 580 ns |
| Common Mode Rejection Ratio | 77 dB |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5nA |
| Input Bias Current | -20nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.005μA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR, 77dB PSRR |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9077EKA+T Overview
For convenience, it is packaged in SOT-23-8 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9077 .The comparator presents a quiescent current of 6.6μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 6.6μA .The compartator could be damaged if the current supply exceeds 6.6μA .Input current to the device cannot exceed 5nA .
MAX9077EKA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6.6μA
MAX9077EKA+T Applications
There are a lot of Maxim Integrated MAX9077EKA+T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Alarm and Monitoring Circuits
- Appliances
- Ultra-Low Power Systems
- Point of load regulators
- RC Timers
- Power Supervision
- Wireless Base Stations
- Set Top Boxes
- Building automation