MAX9053BEUB-T
| Parameters | |
|---|---|
| Type | with Voltage Reference |
| Terminal Finish | TIN LEAD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9053 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Supply Current-Max | 0.13mA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 8mA |
| Propagation Delay (Max) | 450ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
MAX9053BEUB-T Overview
The product is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) for ease of transportation.Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 10 terminals of the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a with Voltage Reference chip.A total of 2 elements can be found in it.The device is equipped with 10 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.In order to find a solution that meets your specific needs, search MAX9053 for more pin-to-pin solutions.3/5V power supplies are enough to run the device.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.13mA .
MAX9053BEUB-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
MAX9053BEUB-T Applications
There are a lot of Maxim Integrated MAX9053BEUB-T linear comparators applications.
- Limit Comparators
- Mobile Phones and Tablets
- Notebooks and PDAs
- Metering Systems
- Battery management and protection
- Laptop Computers
- Infotainment and Clusters
- Body Control Modules
- Self-diagnostics
- Wearable Devices