MAX9041AEUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Output Type | TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 8mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 72μA |
| Supply Current-Max | 0.072mA |
| Response Time | 400 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 1pA |
| Hysteresis | 3 mV |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9041AEUT+T Overview
For convenience, it is packaged in SOT-23 .The comparator has a TTL output.As a result, it is designed with Strip package.6 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.There are a total of 1 elements in it.The device is equipped with 6 pins.Electronic comparator has 6 pins.The comparator presents a quiescent current of 72μA volts.The board has a Surface Mount for mounting on a PCB or any other board.3/5V power supplies are enough to run the device.Temperature higher than 85°C is not recommended.Comparator electronics will not be able to function at temperatures below -40°C .5.5V is the maximum supply voltage of the comparator.This comparator allows minimum supply voltage of 2.5V .The part can be powered at a minimum current of 0.072mA .This comparator basically consists of a COMPARATOR amplifier with very high gain.
MAX9041AEUT+T Features
TTL output capability
Employing 1 elements
Quiescent Current: 72μA
COMPARATOR amplifier
MAX9041AEUT+T Applications
There are a lot of Maxim Integrated MAX9041AEUT+T linear comparators applications.
- Notebooks and PDAs
- Pulse, Squarewave, and Time Delay Generators
- Wide Range VCO; MOS Clock Timers
- Appliances
- Handheld Instruments
- Infotainment & cluster
- Limit Comparators
- Automotive
- Automatic Test Equipment
- Industrial