MAX9032AUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9032 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 70μA |
| Max Supply Current | 70μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9032AUA+ Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Rail-to-Rail, TTL output type.As a result, it is designed with Tube package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching MAX9032 .There is a quiescent current of 55μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 70μA for normal use.If the current supply exceeds 70μA , the comparator might be damaged.A power supply of 3/5V is sufficient for the operation of the device.
MAX9032AUA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9032AUA+ Applications
There are a lot of Maxim Integrated MAX9032AUA+ linear comparators applications.
- System control and monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- Factory automation & control
- General-Purpose Portable Devices
- Infotainment & cluster
- Mobile Phones and Tablets
- Power management
- Appliances
- Ultra-Low Power Systems