MAX9025EBT+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, CSPBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Comparator |
| Max Power Dissipation | 308mW |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9025 |
| Pin Count | 6 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.7μA |
| Output Current | 50mA |
| Max Supply Current | 1.7μA |
| Propagation Delay | 28 μs |
| Quiescent Current | 2.2μA |
| Response Time | 28000 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 2.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 50.45dB CMRR, 60dB PSRR |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9025EBT+T Overview
The product is packaged in 6-WFBGA, CSPBGA for ease of transportation.A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.This device is designed in Tape & Reel (TR) case.You can find 6 terminals of the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type with Voltage Reference .Electronic comparator consists of 1 elements in total.As a result, it contains 6 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 6 pins on the comparator.Search MAX9025 to find more pin-to-pin solutions.A quiescent current of 2.2μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 1.7μA for normal use.If the current supply exceeds 1.7μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.You can input a maximum current of 1nA into this device.This part is from the Beyond-the-Rails? comparator series.
MAX9025EBT+T Features
CMOS, Push-Pull, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.2μA
MAX9025EBT+T Applications
There are a lot of Maxim Integrated MAX9025EBT+T linear comparators applications.
- Mobile Communications
- Automatic Test Equipment
- Limit Comparators
- DC/DC and AC/DC power supplies
- Infotainment and Clusters
- Battery-Powered Electronics
- Lithium ion battery monitoring
- Body Control Modules
- Laptop Computers
- Security Detection Systems