MAX9021AUK-T
| Parameters | |
|---|---|
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9021 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Supply Current-Max | 0.005mA |
| Response Time | 8000 ns |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Average Bias Current-Max (IIB) | 0.08μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 8μs |
MAX9021AUK-T Overview
For convenience, it is packaged in SC-74A, SOT-753 .Output type of this comparator is CMOS, Rail-to-Rail, TTL .The part is shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.As a result, it contains 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .If you require more pin-to-pin solutions, search MAX9021 for more options.Providing a minimum current of 0.005mA is possible for this part.
MAX9021AUK-T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
MAX9021AUK-T Applications
There are a lot of Maxim Integrated MAX9021AUK-T linear comparators applications.
- Laptop Computers
- Building automation
- Ultra-Low Power Systems
- Power management
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Handheld Instruments
- Consumer Medical Electronics
- Automotive
- Limit Comparators