MAX901BCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX901 |
| Output Type | TTL |
| Number of Elements | 4 |
| Number of Channels | 2 |
| Nominal Supply Current | -12mA |
| Max Supply Current | -12mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 6mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 15mA 12mA 6mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX901BCPE+ Overview
A convenient transport package is provided in 16-DIP (0.300, 7.62mm) .Output type of this comparator is TTL .This package has been designed with Tube .There are16 terminals on the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.A total of 4 elements can be found in it.Electronic comparator is recommended to mount the device using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.This comparator has 16 pins.Try search MAX901 to get more pin-to-pin solutions for your special needs.A quiescent current of 6mA is displayed by this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of -12mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds -12mA .In order to maintain the quality of the output, 2 channels cooperate together.
MAX901BCPE+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6mA
MAX901BCPE+ Applications
There are a lot of Maxim Integrated MAX901BCPE+ linear comparators applications.
- Window Comparators, Multivibrators
- Mobile Communications
- Point of load regulators
- Power management
- Wireless Base Stations
- RC Timers
- Current and voltage sensing
- Infotainment & cluster
- Battery management and protection
- Alarm and Monitoring Circuits