MAX901AESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX901 |
| Pin Count | 16 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 55/10GND/-5V |
| Nominal Supply Current | -12mA |
| Max Supply Current | -12mA |
| Quiescent Current | 15mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 6μA |
| Input Bias Current | 6μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 15mA12mA6mA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 6μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX901AESE+T Overview
In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .This comparator is of the TTL output type.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 16 terminals of the comparator.The chip belongs to Comparator .In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.Electronic comparator has 16 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 16 pins.Search MAX901 to find more pin-to-pin solutions.The comparator presents a quiescent current of 15mA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be -12mA .If the current supply exceeds -12mA , the comparator might be damaged.There is sufficient power to run the device from 55/10GND/-5V power supplies.A maximum current of 6μA can be supplied to the device.
MAX901AESE+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
MAX901AESE+T Applications
There are a lot of Maxim Integrated MAX901AESE+T linear comparators applications.
- Metering Systems
- Portable Battery Monitoring
- General-Purpose Portable Devices
- Handheld Instruments
- Industrial
- Battery-Powered Electronics
- Power management
- Analog front end
- Set Top Boxes
- Wireless Base Stations