Parameters |
Factory Lead Time |
6 Weeks |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BICMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX8599 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
28V |
Output Type |
Transistor Driver |
Operating Supply Voltage |
28V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
5mA |
Nominal Supply Current |
3.4A |
Output Configuration |
Positive |
Output Current |
20A |
Voltage - Supply (Vcc/Vdd) |
4.5V~28V |
Control Features |
Current Limit, Enable, Frequency Control, Power Good, Soft Start |
Input Voltage (Min) |
4.5V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
200kHz~1.4MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
1.4MHz |
Max Duty Cycle |
99.5 % |
Clock Sync |
No |
Duty Cycle |
99.5 % |
Height Seated (Max) |
0.8mm |
Length |
4mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX8599ETE+ Overview
In the 16-WQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 200kHz~1.4MHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Searching "MAX8599" will return other relevant dc to dc converter ics. Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. Test statistics indicate DC regulator outputs 28V voltage. If you start a project, note down the dc dc regulator's usual output current of 20A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 99.5 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1.4MHz for this dc regulators. It is suggested that users apply 28V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It runs on a supply current of 5mA. For this the controllers dc, the nominal current supply is 3.4A.
MAX8599ETE+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %
MAX8599ETE+ Applications
There are a lot of Maxim Integrated MAX8599ETE+ DC to DC converter applications.
- Smoke exhaust equipment
- Digital precision reference circuits
- Industrial controllers
- Smoke prevention equipment
- Various precision measuring instruments
- Telecommunications equipment
- Electrical distribution systems
- Household control circuits
- Surge protection circuits
- Automation technology