MAX814TESA+
| Parameters | |
|---|---|
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX814 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 85μA |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.03V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3.03V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.06V |
| Reset Delay Time | 250 ms |
| Height | 1.5mm |
| Length | 5mm |
MAX814TESA+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. There is a 85μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MAX814, the base PMIC number. A maximum supply temperature of 85μA can be used.
MAX814TESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current
MAX814TESA+ Applications
There are a lot of Maxim Integrated MAX814TESA+ Voltage Supervisors applications.
- Set top box
- Solar power charger
- Low voltage/high power - AI, GPU
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
- Power distribution systems of operating room
- Power communication system
- Personal computers
- Detection of phase loss
- Leakage current detection