MAX793TESE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX793 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 62μA |
| Nominal Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX793TESE+ Overview
As you can see, this power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. As a reference, this IC power includes 16-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 16 pins in it. Pin count of the power management is 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain, Push-Pull during operation. In order to maintain a stable supply current for the power management, 62μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX793, the base power ics number. To be able to work, this power management requires 3.3/5V volts of power.
MAX793TESE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current
MAX793TESE+ Applications
There are a lot of Maxim Integrated MAX793TESE+ Voltage Supervisors applications.
- Multi-voltage system
- DC stabilized power supply module
- Telecommunications equipment
- Insulation fault location system
- Electronics installed in the vehicle
- Radio
- External alarm
- Embedded computing
- WiFi router
- Digitally controlled LDO regulators circuit