MAX792TCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.06V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | 3.06V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX792TCPE+ Overview
Power management is mounted through 16 terminals. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes DIP functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 16 pins on IC management. There are 16 pins on the supervisor. IC management can only work with a supply voltage of 2.75V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. There is a 150μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. There is a requirement for 3/5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 150μA.
MAX792TCPE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792TCPE+ Applications
There are a lot of Maxim Integrated MAX792TCPE+ Voltage Supervisors applications.
- External alarm
- Network equipment
- Dash board
- Leakage protection
- Power communication system
- Cloud computing
- Microcontroller system
- Medical-specific isolation transformer
- Automotive permanent magnet synchronous motors
- Unattended substation automation