MAX706ATESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 90μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706ATESA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 90μA. There are other features such as WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR to name a few. You can always use MAX706, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 3.3/5V watts is required for the operation of this power management.
MAX706ATESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
90μA operating supply current
MAX706ATESA+ Applications
There are a lot of Maxim Integrated MAX706ATESA+ Voltage Supervisors applications.
- Precision measurement
- Power distribution systems of ICU
- Satellite navigation
- Embedded computing
- Medical-specific isolation transformer
- Leakage current detection
- Power distribution systems of infant care room
- FPGA design
- Multi-voltage system
- Rechargeable batteries