MAX6952EPL+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.333W |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX6952 |
| Pin Count | 40 |
| Operating Supply Voltage | 5.5V |
| Configuration | 5 x 7 (Matrix) |
| Interface | 4-Wire Serial |
| Operating Supply Current | 12mA |
| Power Dissipation | 1.333W |
| Output Current | 500mA |
| Max Supply Current | 16mA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Display Type | LED |
| High Level Output Current | 50mA |
| Low Level Output Current | 500mA |
| fmax-Min | 8 MHz |
| Number of Segments | 140 |
| Multiplexed Display Capability | YES |
| Display Mode | DOT MATRIX |
| Digits or Characters | 4 Digits |
| Height Seated (Max) | 5.08mm |
| Length | 52.075mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6952EPL+ Overview
As with Tube, the package has been designed similarly.Display drivers is included in the package version 40-DIP (0.600, 15.24mm).The Display type of this electrical device is LED.On the board, this component is mounted using Through Hole.The operating temperature of this electrical part is -40°C~85°C.Providing that the power source is 2.7V~5.5VV, it should work.Terminating transmission lines with devices with matching impedances is called 40 termination.The device belongs to the MAX6952 family.Display drivers is equipped wDisplay driversh 40 pin count.As it is designed with 40 pins, it can be mounted on a variety of surfaces.The Through Hole axis is used by the board manufacturer in order to mount this electronic component.Power is provided by a voltage of 3V.For 12mA to function properly, it requires current supply.The Seller Group has two 140 segments, representing the "Electronics" segment of any member of its equipment solutions business.A high level of efficiency can be achieved by maintaining the supply voltage at 5.5V.When the maximum current required for its operation reaches 16mA, the device is considered to be operational.
MAX6952EPL+ Features
40-DIP (0.600, 15.24mm) package
MAX6952 family
40 pin count
40 pins
MAX6952EPL+ Applications
There are a lot of Maxim Integrated MAX6952EPL+ display drivers applications.
- Calculators and meters
- Industrial Display
- White Goods Industrial Weighing
- Bar Graphs and Matrix Displays
- COPS? or Microprocessor Displays
- Industrial control panels
- Gaming Machines Security
- DC Plasma Displays
- Instrumentation Industrial Control
- Augmented reality glasses