MAX694CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX694 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 350μA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX694CPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tube-packaging method applied to IC management. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. In a 5V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount, Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 8 pins are present in total in this power management. The pins of the power management system count 8. A voltage (Vsup) that doesn't fall below 4.75V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 350μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX694, which is the base power ics number. To be able to work, this power management requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10mA.
MAX694CPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current
MAX694CPA+ Applications
There are a lot of Maxim Integrated MAX694CPA+ Voltage Supervisors applications.
- Kitchen appliances
- Satellite navigation
- Network equipment
- Data storage applications
- Battery-powered equipment
- Telecommunications equipment
- Analog circuit
- Utility meter
- Battery cars
- Precision measurement