MAX691ACWE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Frequency | 250kHz |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Max Output Current | 25mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 762mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691ACWE+ Overview
There are 16 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 4.75V-voltage supply. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. A total of 16 pins are located on this power management. 16 pins are present on the power management system. It is recommended that Vsup should not be less than 0V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. The power management's supply current is 350μA. You can always use MAX691, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA. Most of the time, a frequency of 250kHz works well with this IC power.
MAX691ACWE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691ACWE+ Applications
There are a lot of Maxim Integrated MAX691ACWE+ Voltage Supervisors applications.
- Leakage protection
- Microprocessor system
- Power distribution systems of CCU
- Smart meter
- Set top box
- Automotive permanent magnet synchronous motors
- Computer applications
- Telecommunications equipment
- Functional modules
- Power communication system