MAX691ACUE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 533mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691ACUE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. This power ic is packaged in a way that looks like a Tube. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes 16-TSSOP (0.173, 4.40mm Width) functions for your convenience. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 4.75V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 16 pins are present in total in this power management. This power management has 16 pins. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. In order to maintain a stable supply current for the power management, 100μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. The power management must be powered by 5V volts to function properly. The power management can work with a maximum supply temperature of 100μA.
MAX691ACUE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX691ACUE+ Applications
There are a lot of Maxim Integrated MAX691ACUE+ Voltage Supervisors applications.
- Microcontroller system
- Low voltage/high power - AI, GPU
- Satellite navigation
- Solar power charger
- Smart meter
- Magnetic resonance imaging
- Display equipment
- Radio
- Personal computers
- Telecommunications equipment