MAX691ACSE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Frequency | 50kHz |
| Base Part Number | MAX691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Max Output Current | 25mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 696mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX691ACSE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes 16-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 4.75V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 16. This power management has 16 pins. Supply voltage (Vsup) should be at least 0V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. The power management's supply current is 350μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX691, which is the base power ics number. This power management requires 5V power to work. At most, voltage supervisor can operate at a supply temperature of 100μA. It is generally acceptable to use this IC power with a frequency of 50kHz because it will work well in the vast majority of cases.
MAX691ACSE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX691ACSE+ Applications
There are a lot of Maxim Integrated MAX691ACSE+ Voltage Supervisors applications.
- Radio
- FPGA design
- Household appliances
- Consumer electronics
- Detection of phase imbalance
- Electrical fire monitoring system
- Cloud computing
- Rechargeable batteries
- Fire equipment power monitoring system
- Electric heating appliances