MAX6439UTEGYD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 2.188 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 3.3V AND 3.0V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.218V |
| Max Reset Threshold Voltage | 3.383V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6439UTEGYD7+T Overview
It belongs to package SOT-23-6. The analog IC in this device is POWER SUPPLY SUPPORT CIRCUIT. The number of channels available is 2. Total pins are 6. The part must be mounted with Surface Mount. The minimum supply voltage for this part should not be less than 1V volts. An electrical component in this family is a Power Management Circuits. 5.5V voltage greater than 5.5V volts should be supplied to this chip. To activate this device, it should not be less than -40°C. A temperature below 85°C is recommended for its use. There is a 1.2/5V volt power source. In total, 6 pins can be found on it. In this device, 2.188 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 3.3V AND 3.0V can be detected. Devices should have a minimum reset threshold voltage of 3.383V. Devices should have a minimum reset threshold voltage above 3.218V.
MAX6439UTEGYD7+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.218V
MAX6439UTEGYD7+T Applications
There are a lot of Maxim Integrated MAX6439UTEGYD7+T Battery Management ICs applications.
- On-board battery charger
- Center information display (CID)
- Shuttle robots
- Head up display (HUD)
- Motor drive - DC12V-48V industry
- Air conditioner
- Sports cars
- Industrial AC/DC converter
- Accessory drives
- ADAS radar