MAX5075AAUA+T
| Parameters | |
|---|---|
| Base Part Number | MAX5075 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1mA |
| Input Type | RC Input Circuit |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 825mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
MAX5075AAUA+T Overview
For greater flexibility, its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is used.Tape & Reel (TR) is the form of the package.Configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.By using 4.5V~15V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.RC Input Circuit is used as the input type in this program.8 terminations constitute its foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MAX5075.The mount method is Surface Mount.In the device, there are 8 pins.The device is specifically designed to function with a supply voltage of 12V V.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 8 component pins.Considering its maximum power dissipation, 825mW shows its maximum capacity to transfer and conduct power loss without overheating.The power supply of 4.5/15V is able to solve the power supply problems for a wide variety of applications.
MAX5075AAUA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 825mW
MAX5075AAUA+T Applications
There are a lot of Maxim Integrated MAX5075AAUA+T gate drivers applications.
- High-speed communications
- Motor Controls
- RGB applications
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- Telecom switch mode power supplies
- Solar power supplies
- Automotive Applications
- Smart Phones
- Active filtering