MAX5060ETI+
| Parameters | |
|---|---|
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX5060 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 125kHz~1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1.5MHz |
| Duty Cycle | 90 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
MAX5060ETI+ Overview
It comes in a 28-WFQFN Exposed Pad package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.75V~28V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 125kHz~1.5MHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at QUAD. The 28 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. A search for "MAX5060" will reveal other relevant dc to dc converter ics. There are 28 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.75V. According to the test statistics, DC regulator outputs 5.5V voltage. In most cases, the dc dc regulator's output current is 30A. This information should be noted when you begin working with the component. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator has a maximum frequency of 1.5MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5.5V.
MAX5060ETI+ Features
Transistor Driver Outputs
Switching Frequency: 125kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
MAX5060ETI+ Applications
There are a lot of Maxim Integrated MAX5060ETI+ DC to DC converter applications.
- Household control circuits
- Overvoltage protection circuits in TV sets
- Hydrogen power
- USB circuits
- Access control systems
- Injection molding machinery
- Mobile phones
- Smoke exhaust equipment
- Die casting equipment
- Magnetohydrodynamic power