MAX5057BASA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX5057 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Power Supplies | 4/15V |
| Nominal Supply Current | 2.4mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 85ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 32ns 26ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5057BASA+ Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tube represents the package.A total of 2 drivers are integrated into its configuration.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is 4V~15V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as its input type.As a result of its configuration, it contains a maximum of 8 terminations.The base part number MAX5057 refers to a number of related parts.In this case, Surface Mount indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 4.5V volts of power.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver is possible to achieve a maximum output current of 4A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Based on its maximum power dissipation of 471mW, it is clear that it is capable of transferring and conducting power loss without overheating.Due to its power supplies of 4/15V, it solves the power supply problem for a wide range of applications.
MAX5057BASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX5057BASA+ Applications
There are a lot of Maxim Integrated MAX5057BASA+ gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Industrial Modules
- PCMCIA applications
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- Isolated Supplies for Motor Control
- Head-up and Head mounted displays
- Active filtering
- Motor controllers
- Motor Controls