MAX5041EAI+
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5041 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~28V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 1μs |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 525kHz |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5041EAI+ Overview
Capsuled in the 28-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. A solid enclosure of Tube surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 4.75V~28V. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 250kHz 500kHz position. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Phase Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . The 28 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 5V. A search for "MAX5041" will reveal other relevant dc to dc converter ics. There are a total of 28 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.75V. Statistically, DC regulator outputs 3.3V volts. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. It's important to remember that the dc dc regulator's normaloutput current is 60A, so you should note it down when starting a new project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 525kHz on this dc regulators. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. The supply current of the voltage controller is 4mA.
MAX5041EAI+ Features
Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX5041EAI+ Applications
There are a lot of Maxim Integrated MAX5041EAI+ DC to DC converter applications.
- Hydro power
- Scientific testing
- Digital precision reference circuits
- Network technology
- Television equipment
- Window air conditioners
- Program control systems
- Production lines
- Solar power plants
- Emergency lighting monitoring equipment