MAX491ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX491 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 500μA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX491ESD+T Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package houses this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 4.75V~5.25V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.This part number MAX491 can be used to search for more variants based on the product type, temperature, package, etc.14-pin driver IC with improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is usually a 1-bit resolution specified for this receiver when it is used.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.It implements 1 transceivers in total.
MAX491ESD+T Features
Tape & Reel (TR) package
14 pin count
14 pins
5V power supply
MAX491ESD+T Applications
There are a lot of Maxim Integrated MAX491ESD+T Drivers/Receivers/Transceivers applications.
- Satellite communication
- Wireless interactive experience
- WDM transmission
- Wireless network systems
- Wireless communication
- Shortwave receiver
- Satellite radio receiver
- Bridges
- Wireless teaching
- Data center