MAX483CSA+
| Parameters | |
|---|---|
| Operating Supply Current | 250μA |
| Nominal Supply Current | 650μA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX483 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Voltage | 5V |
| Interface | RS-422, RS-485 |
MAX483CSA+ Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 4.75V~5.25V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.As the base part number MAX483 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.8-pin driver IC with improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.IC5V is a high performance driver IC designed to work with a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.With this integrating circuit you can drive LEDs of a voltage of up to 250μA. It can be used to drive large displays.
MAX483CSA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX483CSA+ Applications
There are a lot of Maxim Integrated MAX483CSA+ Drivers/Receivers/Transceivers applications.
- Single fiber bidirectional application
- Vehicle
- Wireless multimedia center in smart home
- Carrier phase observations
- SONET/SDH Network
- Wired telephone
- Broadcast application
- Radio transmission
- Remote controls
- Aircraft positioning