MAX4690EAE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4690 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.09Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 275ns, 175ns |
| Charge Injection | 550pC |
| Channel-to-Channel Matching (ΔRon) | 90m Ω |
| Crosstalk | -65dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 175ns |
| Normal Position | NC |
| On-State Resistance | 1.25Ohm |
| Height | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX4690EAE+ Overview
As the electronic part is packed in 16-SSOP (0.209, 5.30mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. A SPST - NO switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. MAX4690 can be used to search for analog multiplexer variants. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. It is recommended to use 4.5V as the lowest voltage for the electrical part. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX4690EAE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4690EAE+ Applications
There are a lot of Maxim Integrated MAX4690EAE+ Analog Switches & Multiplexers ICs applications.
- Relay replacements
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- RGB switches
- Audio and video switching
- Video signal routing
- Fault Tolerant Systems
- Avionics
- 65 V DACs
- T1/E1 Terminals
- Wireless Local Loop