MAX4638EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4638 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-2.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Time (Ton, Toff) (Max) | 18ns, 7ns |
| Charge Injection | 13pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 20ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4638EUE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. A 2.5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. 1 circuits are used in this analogue multiplexer. Search with MAX4638 if you are looking for analog multiplexer variants. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
MAX4638EUE+ Features
8 Channels
-3db Bandwidth: 50MHz
MAX4638EUE+ Applications
There are a lot of Maxim Integrated MAX4638EUE+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- High-Voltage
- Battery-powered systems
- Industrial
- Optical Applications
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Avionics and Military Systems
- Medical Instrumentation
- SDH/SONET multiplexers