MAX4590EAE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -65dB @ 1MHz |
| Height Seated (Max) | 1.99mm |
| RoHS Status | Non-RoHS Compliant |
MAX4590EAE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of its design, the 16 series is equipped with this electronic component. A SPST - NO switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer.
MAX4590EAE Features
1 Channels
Switch Circuit: SPST - NO
MAX4590EAE Applications
There are a lot of Rochester Electronics, LLC MAX4590EAE Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Fault Tolerant Systems
- Switching Systems
- Digital access cross connects
- Communication systems
- FTTH
- Audio and video signal routing
- Avionics
- Precision data acquisition