MAX4582EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 74 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 10pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -96dB @ 1MHz |
| Switch-off Time-Max | 100ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4582EPE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Through Hole. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. As part of its design, the 16 series is equipped with this electronic component. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
MAX4582EPE Features
4 Channels
Switch Circuit: SP4T
MAX4582EPE Applications
There are a lot of Rochester Electronics, LLC MAX4582EPE Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- PBX interfaces
- DSLAMs
- Sample hold systems
- SONET
- Automatic test equipment
- MP3 players
- Ultrasound
- Relay Replacement
- Audio and video signal routing