MAX4551EEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4551 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 1μA |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF 3pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 110ns, 90ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 125ns |
| Switch-off Time-Max | 100ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4551EEE Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPST - NC switching circuit is used to build these analog multiplexers. 4 circuits are used in this analogue multiplexer. Try searching with MAX4551 if you're looking for variants. The internal resistance of this digital multiplexer is 120Ohm. A analogue multiplexer of this type is a Multiplexer or Switches. Analog switch ics with Dual, Single supply type are cost-effective. This multiplexer would work with 1μA current. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
MAX4551EEE Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX4551EEE Applications
There are a lot of Maxim Integrated MAX4551EEE Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Industrial
- Fiber In The Loop (FITL)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial and process control systems
- Data Acquisition Systems
- Cable Modem
- 65 V DACs
- Central office
- Audio/video switches